Getting started
Install 3DsWorks, open a design and build the first solid.
What 3DsWorks is
3DsWorks is a parametric CAD/CAE workstation: sketches are driven by dimensions and constraints, every modelling step lands on a feature timeline, and the same model carries through analysis, drawings, rendering and animation. It runs natively on Windows, macOS and Linux, and as a web app in the browser.
CAD/CAE is free to use. The product is commercial software: source code is not published and is provided under contract or for security review. See About for the licensing model.
Open the app
- Desktop: install the package for your system from the download page, then launch 3DsWorks.
- Web: open the web build in a current browser. It prefers WebGPU and falls back to WebGL2; add
?webglto the address to force WebGL2. - Sample: the app can start with a sample part when you want to look around before modelling.
Each open design gets its own tab, with its own undo history, selection and camera. A dot on the tab marks unsaved changes.
Your first part
- New design. Ctrl+N (⌘N on macOS). Units are millimetres unless you change them; Z is up.
- Start a sketch. Choose a datum plane in the Browser, or a planar face on an existing body, and start a sketch.
- Draw a profile. Press R for a two-point rectangle, or L for a line. Click, then click again; press Esc to end the tool.
- Dimension it. Press D, click a line, and type the value. The sketch turns to the fully constrained colour when the dimensions and constraints leave no freedom.
- Finish the sketch. The closed region becomes a profile.
- Extrude. Press E, set the distance, and confirm. The feature appears on the timeline.
- Save. Ctrl+S writes a
.scdesign file.
Double-click a feature on the timeline to edit it. Change a dimension and the model rebuilds; drag the timeline marker back to see the design as it was earlier.
Save, autosave and recovery
- Designs are saved as
.sc. Earlier.solidcraftdesigns still open, and Save keeps their extension. - Every save keeps the previous version next to the file as
<file>.bak. If a design will not open, copy that backup to a new name ending in.scand open the copy. - Designs that were never saved are autosaved in the recovery folder, and the app offers them at the next start.
Find any command
Everything the interface can do is a command. Click the search field in the ribbon, or press S, and type what you want to do. The results group commands by their ribbon location and also match features and parameters in the current design.
Advanced: type a command id and a JSON object to run it with explicit values, for example solid.extrude {"distance": 20}. The popup validates the JSON as you type.
Where to go next
- The window — panels, selection and navigation.
- Sketching and constraints — the part everything else is built on.
- Features and parameters — solids, sheet metal, plastic and expressions.
- Simulation — check that the part holds.