3DsWorks
Menu
Home/Migration guide

Migrate from another 3D CAD

Geometry comes with you and habits stay the same, but feature history has to be rebuilt. This guide is explicit about what works and what does not.

Four steps to migrate

  1. 01 · Export STEP

    In your current 3D CAD, choose Save As and pick STEP (.step / .stp). Exporting an assembly keeps the part hierarchy.

  2. 02 · Import into 3DsWorks

    Open 3DsWorks and choose Import. STEP and IGES are the most reliable paths today; files exported from other 3D CAD are detected as Y-up and can be stood upright during import.

  3. 03 · Switch the navigation preset

    In Preferences › Navigation, choose the preset closest to your old tool: middle-button orbit, right-click menus and Normal to Selection behave as you expect. Other styles are available too.

  4. 04 · Rebuild features

    STEP carries geometry, not the feature tree. To keep an editable parametric history, rebuild the features in 3DsWorks. Parts that are final and only need viewing or drawing do not need rebuilding.

Format reference

PurposeRecommended formatNotes
Parts and assembliesSTEP (AP203 / AP214 / AP242)Most reliable; solids and assembly hierarchy come through
Surfaces and legacy exchangeIGES 5.3Reads solids or sewn trimmed surfaces
Rhino.3dmReads solids
FreeCAD.FCStdReads solids
3D printingSTL / 3MFExports meshes, ready for a slicer
Mesh and renderingOBJ / glTF (.glb)Mesh exchange and appearance materials
2D deliveryDXF / SVGExports the current view; full drawings in development
Images and texturesPNG / JPEGCanvases and decals
RoboticsURDFExports an assembly as a robot model
Native formats.sldprt / .sldasm, etc.Native import is planned and not supported yet

Navigation reference

With a preset close to your old tool selected, the following stays the same. Shortcuts live in Preferences › Shortcuts and can be changed.

Action3DsWorks (common preset)
OrbitMiddle mouse drag
PanCtrl + middle mouse drag
ZoomScroll wheel
Look normal to a planeRight-click plane › Normal to Selection
Context menuRight-click, as in common 3D CAD
Mouse gesturesEnabled in Preferences, several presets

Known limitations

  • Feature history: STEP / IGES carry geometry only; parametric features must be rebuilt.
  • Native files: direct import of .sldprt / .sldasm is still in development.
  • Drawings: the current view exports to DXF; the full drawing workspace is in development.
  • Add-ins and macros: plugins, macros and APIs from other 3D CAD do not run directly; rebuild them with the command system and MCP.
  • PDM: planned; keep using your current system for now.
  • CAM: not built in; export STL / 3MF to existing CAM software or a partner solution.
  • Simulation: linear static analysis is supported; thermal, non-linear and dynamic analysis are not covered yet.
  • Animation: keyframes and storyboards are supported, exportable as GIF / PNG.
Note: this page describes a general migration method and does not target any specific vendor. Format and navigation references are compiled from public information; where they differ, the official product documentation wins.